RomRaider Logo

RomRaider

Open Source ECU Tools
 FAQ •  Register •  Login 

RomRaider

Documentation

Community

Developers

It is currently Mon Dec 11, 2017 3:37 am

All times are UTC - 5 hours [ DST ]





Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: Learning viewn 1.0RC3 connection error
PostPosted: Sat Oct 03, 2015 5:29 pm 
Offline
Newbie

Joined: Sat Oct 03, 2015 4:46 pm
Posts: 6
Sorry I'm a noob.
I tried to connect to my 2012 Impreza through openport2 and keep getting error.
This is what it says in the log:
Code:
[14:16:29.7894565] Learning View version 1.0 RC3

[14:16:35.6587922] PassThruOpen returned 0 and DeviceID 1
[14:16:35.6627924] PassThruReadVersion returned 0
[14:16:35.6637925] Device firmware version: 1.15.4474
[14:16:35.6647925] DLL version: 1.01.4500 Jun 26 2015 15:06:54
[14:16:35.6657926] API version: 04.04
[14:16:35.6707929] PassThruConnect returned 0 and ChannelID 3
[14:16:35.6737931] PassThruStartMsgFilter returned 0
[14:16:35.7157955] ECU Init
[14:16:35.7497974] PassThruWriteMsgs returned 0
[14:16:35.7527976] WRITE 6 bytes: 80 10 F0 01 BF 40
[14:16:37.7609124] PassThruReadMsgs returned 16
[14:16:37.7649127] PassThruGetLastError returned 16, Message: no data was read
[14:16:39.5830166] A read error has occured: PassThru Error
[14:16:39.5930172] PassThruDisconnect returned 0
[14:16:39.6000176] PassThruClose returned 0



My openport connects ok with ecuflash. At least I was able to connect and download my factory rom.
What's wrong with my learing view?


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Sat Oct 03, 2015 8:47 pm 
Offline
Newbie

Joined: Sat Oct 03, 2015 4:46 pm
Posts: 6
Sometime I get ECU ID not found error:
Code:
[17:35:45.4258763] PassThruOpen returned 0 and DeviceID 2
[17:35:45.4268764] PassThruReadVersion returned 0
[17:35:45.4278764] Device firmware version: 1.15.4474
[17:35:45.4288765] DLL version: 0.50.2598 Jun 26 2009 15:02:29
[17:35:45.4298765] API version: 04.04
[17:35:45.4328767] PassThruConnect returned 0 and ChannelID 4
[17:35:45.4348768] PassThruStartMsgFilter returned 0
[17:35:45.4458775] ECU Init
[17:35:45.4748791] PassThruWriteMsgs returned 0
[17:35:45.4758792] WRITE 6 bytes: 80 10 F0 01 BF 40
[17:35:45.5438831] PassThruReadMsgs returned 0
[17:35:45.5448831] READ 0 bytes
[17:35:45.7298937] PassThruReadMsgs returned 0
[17:35:45.7318938] READ 110 bytes: 80 F0 10 69 FF A2 10 09 73 24 3C 74 07 F3 FA C9 8C 02 06 FE AC 00 00 00 46 CA 54 FD B8 60 00 0F 20 00 00 00 00 00 DC 00 00 5D 1F 30 80 F0 20 10 FC 43 7B 00 F5 C1 8E 00 00 00 01 21 F1 BE 00 F9 00 00 00 00 00 E0 00 00 00 00 00 00 00 00 00 00 00 00 C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1D
[17:35:50.7501808] ECU ID of 73243C7407 not found:
[17:35:52.6942920] PassThruDisconnect returned 0
[17:35:52.7062927] PassThruClose returned 0


Not sure what's going on.


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Sat Oct 03, 2015 8:51 pm 
Offline
RomRaider Developer

Joined: Wed May 20, 2009 9:49 pm
Posts: 5659
Location: Canada eh!
Your ECU is not supported by that version of LV, use RR instead.


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Sun Oct 04, 2015 12:12 am 
Offline
Newbie

Joined: Sat Oct 03, 2015 4:46 pm
Posts: 6
dschultz wrote:
Your ECU is not supported by that version of LV, use RR instead.


Why is it that other people with 2012 Impreza on Nasioc are able to use LV? Are there different versions of ECU for the 2012 Impreza?

How do I use RR to the same screenshoot as LV?

Thanks.


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Sun Oct 04, 2015 9:25 pm 
Offline
RomRaider Developer

Joined: Wed May 20, 2009 9:49 pm
Posts: 5659
Location: Canada eh!
Do they have the exact same ECUID?

In RR Logger press the LTV button on the left side of the screen.
viewtopic.php?t=9745


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Mon Oct 05, 2015 11:49 am 
Offline
Newbie

Joined: Sat Oct 03, 2015 4:46 pm
Posts: 6
dschultz wrote:
Do they have the exact same ECUID?

In RR Logger press the LTV button on the left side of the screen.
viewtopic.php?t=9745


Thanks. I'll look into LTV.
Seems like LTV needs 'def' also... unfortunately my ecu rom version is probably not supported.
Will try hacking a little to see if I can get it to work.


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Mon Oct 05, 2015 10:02 pm 
Offline
RomRaider Developer

Joined: Wed May 20, 2009 9:49 pm
Posts: 5659
Location: Canada eh!
You will need to submit a stock version of your ROM to get it defined then.


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Fri Jun 10, 2016 3:21 am 
Offline
Newbie

Joined: Tue Nov 20, 2012 12:07 am
Posts: 4
Having this same problem getting a read error when trying to connect to LV, happened after upgrading ECUFlash and Tactrix firmware. RR and ECUFlash working just fine.
[20:23:04.2827020] Learning View version 0.6a
[20:23:06.3263056] PassThruOpen returned 0 and DeviceID 1
[20:23:06.3263056] PassThruReadVersion returned 0
[20:23:06.3263056] Device firmware version: 1.16.4769
[20:23:06.3263056] DLL version: 0.50.2598 Jun 26 2009 15:02:29
[20:23:06.3263056] API version: 04.04
[20:23:06.3263056] PassThruConnect returned 0 and ChannelID 3
[20:23:06.3263056] PassThruStartMsgFilter returned 0
[20:23:06.3575057] ECU Init
[20:23:06.3887057] PassThruWriteMsgs returned 0
[20:23:06.3887057] WRITE 6 bytes: 80 10 F0 01 BF 40
[20:23:08.4167093] PassThruReadMsgs returned 9
[20:23:08.4167093] PassThruGetLastError returned 9, Message: fewer messages were read than requested before timeout
[20:23:08.4167093] READ ERROR: PassThru Error
[20:23:10.3979128] PassThruDisconnect returned 0
[20:23:10.4291128] PassThruClose returned 0


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Fri Jun 10, 2016 7:18 am 
Offline
Newbie

Joined: Thu Mar 31, 2011 3:31 pm
Posts: 10
I get the exact same connection problem as the OP, but everything else works perfectly. Learning view on romraider logger works!

PS. Yay for first post! Been a reader up to now.


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Sun Aug 07, 2016 11:54 pm 
Offline
Newbie

Joined: Wed Jul 16, 2014 2:32 am
Posts: 11
Similar issue for me.

LV used to work on the laptop but recently comes up with a fault telling me to look into this log. Purchased a Nexus 7 recently which is running BTSSM and can access a LV from there so wouldn't have thought it was an issue with the Tactrix cable. Have also tried redownloading LV which didn't help either

https://drive.google.com/file/d/0B_0...ew?usp=sharing

_________________
2000 Legacy B4 RSK - SOLD
2006 Legacy BP5 GT Spec B wagon
2011 VW T5 van 2.0L of turbo diesel awesomeness


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Mon Aug 15, 2016 9:10 am 
Offline
Newbie

Joined: Thu Jun 05, 2008 10:43 am
Posts: 2
Having connection issues also.. Seems to partially connect, enough to get my ROM/ECU ID and vehicle model.. then bombs.

Edit.. Looks like im using an old version of Learning View.. ill try with the newer version, but it looks like others are having a similar issue on the newer version also.

[19:54:01.2542141] Learning View version 0.6a
[19:54:05.9810224] PassThruOpen returned 0 and DeviceID 1
[19:54:05.9810224] PassThruReadVersion returned 0
[19:54:05.9810224] Device firmware version: 1.16.4769
[19:54:05.9810224] DLL version: 1.02.4798 Jun 13 2016 17:16:24
[19:54:05.9810224] API version: 04.04
[19:54:05.9966224] PassThruConnect returned 0 and ChannelID 3
[19:54:05.9966224] PassThruStartMsgFilter returned 0
[19:54:06.0122224] ECU Init
[19:54:06.0590225] PassThruWriteMsgs returned 0
[19:54:06.0590225] WRITE 6 bytes: 80 10 F0 01 BF 40
[19:54:08.0714261] PassThruReadMsgs returned 16
[19:54:08.0714261] PassThruGetLastError returned 16, Message: no data was read
[19:54:08.0714261] READ ERROR: PassThru Error
[19:54:10.6766306] PassThruDisconnect returned 0
[19:54:10.6922307] PassThruClose returned 0

Image


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Mon Aug 15, 2016 8:11 pm 
Offline
Newbie

Joined: Thu Jun 05, 2008 10:43 am
Posts: 2
Tried the latest version of Learning View... no go... uninstalled java 8, installed java 7... no go.. but the log looks like it got a little further or something. Or maybe the logging is more verbose than the old version.. idk.

[20:01:57.1109128] Learning View version 1.0 RC3

[20:02:00.9329195] PassThruOpen returned 0 and DeviceID 1
[20:02:00.9329195] PassThruReadVersion returned 0
[20:02:00.9329195] Device firmware version: 1.16.4769
[20:02:00.9329195] DLL version: 1.02.4798 Jun 13 2016 17:16:24
[20:02:00.9329195] API version: 04.04
[20:02:00.9329195] PassThruConnect returned 0 and ChannelID 3
[20:02:00.9329195] PassThruStartMsgFilter returned 0
[20:02:00.9641195] ECU Init
[20:02:01.0109196] PassThruWriteMsgs returned 0
[20:02:01.0109196] WRITE 6 bytes: 80 10 F0 01 BF 40
[20:02:01.0733197] PassThruReadMsgs returned 0
[20:02:01.0733197] READ 0 bytes
[20:02:01.1669199] PassThruReadMsgs returned 0
[20:02:01.1669199] READ 62 bytes: 80 F0 10 39 FF A2 10 11 2F 12 78 52 06 73 FA CB A6 2B 81 FE A8 00 81 00 60 CE 54 F9 B1 E4 00 0C 20 00 00 00 00 00 DC 00 00 5D 1F 30 C0 F2 26 00 00 43 FB 00 E1 00 00 00 00 00 00 C1 F0 A9
[20:02:01.8533211] ECU supported (ECUID:2F12785206 CALID:A2WC510N DESC:05 USDM Legacy GT MT):
[20:02:01.8689211] Auxillary Parameters
[20:02:01.9781213] PassThruWriteMsgs returned 0
[20:02:01.9781213] WRITE 16 bytes: 80 10 F0 0B A8 00 00 00 23 00 00 12 00 00 08 70
[20:02:04.0217249] PassThruReadMsgs returned 16
[20:02:04.0217249] PassThruGetLastError returned 16, Message: no data was read
[20:02:07.1261304] An error has occured: PassThru Error
[20:02:07.1261304] PassThruDisconnect returned 0
[20:02:07.1417304] PassThruClose returned 0


Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Thu Nov 09, 2017 4:39 pm 
Offline
Newbie

Joined: Thu Nov 09, 2017 4:28 pm
Posts: 3
I have the same error and it will not be fixed. It's a Subaru Sti 2005. Can someone help me out?


Attachments:
image.jpeg
image.jpeg [ 4.7 MiB | Viewed 98 times ]
Top
 Profile  
 
 Post subject: Re: Learning viewn 1.0RC3 connection error
PostPosted: Sat Nov 18, 2017 10:45 pm 
Offline
RomRaider Donator

Joined: Tue Apr 29, 2014 12:48 am
Posts: 723
Why dont you use romraider logger for learning view?

Sent from my GT-N5100 using Tapatalk

_________________
RomRaid!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subsilver by phpBBservice.nl