RomRaider Logo

RomRaider

Open Source ECU Tools
 FAQ •  Register •  Login 

RomRaider

Documentation

Community

Developers

It is currently Tue Dec 12, 2017 4:19 am

All times are UTC - 5 hours [ DST ]





Post new topic Reply to topic  [ 42 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Fri Jan 24, 2014 2:51 pm 
Offline
Experienced
User avatar

Joined: Wed Nov 10, 2010 7:56 am
Posts: 370
klam wrote:
using kkl vag-com for 409.1 cable, the app doesn't seem to load the com port. clicking on the dropdown doesn't open the list.
Attachment:
rom_pull_nocom.jpg


same to me:
OS Win7 64-bit, interface KKL to RS232 (yes, real serial COM1).

ecuMem doesn´t find any COM-ports. Running in XP-mode or admin-mode does not chance anything.
Running the interface with RomRaider works fine.

Any ideas, if I do not need a driver for the interface ?
With WinXP SP2 this combinations works proper.

_________________
performence based on engineering..


Top
 Profile  
 
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Fri Jan 24, 2014 4:32 pm 
Offline
Senior Member

Joined: Mon Jan 19, 2009 2:31 pm
Posts: 1372
Location: Saratov, Russia
ecuMem works thru Microsoft net Framework.
It looks like there is no applicable\ there is incompatible method for Com port enumeration under Win64.
The most recent version 4.5 of NET Framework tried and is not a solution.

Edit: updated version attached
viewtopic.php?f=32&t=8513


Top
 Profile  
 
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Tue Jul 08, 2014 3:14 pm 
Offline
Newbie

Joined: Thu Jan 24, 2013 5:33 am
Posts: 21
Location: Maribor, Slovenia
Should this utility work with Tactrix OpenPort 2.0 cable?

It doesn't 'simulate' a COM port, what I see in Device manager is a 'Vehicle PassThru Interfaces -> Tactrix Openport 2.0 J2534 Vehicle Interface'...


Top
 Profile  
 
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Tue Jul 08, 2014 11:44 pm 
Offline
Senior Member

Joined: Mon Jan 19, 2009 2:31 pm
Posts: 1372
Location: Saratov, Russia
OP2 is not supported.
$7-15 k-line adapter does not seem to be overpriced.


Top
 Profile  
 
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Sat Mar 04, 2017 10:24 pm 
Offline
Newbie

Joined: Sat Feb 01, 2014 8:41 am
Posts: 6
Will this read the AG572 CrossSport ECU??


Top
 Profile  
 
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Sun Mar 05, 2017 4:30 am 
Offline
Senior Member

Joined: Mon Jan 19, 2009 2:31 pm
Posts: 1372
Location: Saratov, Russia
It works for calibration area 0x60000


Top
 Profile  
 
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Wed Apr 26, 2017 11:04 pm 
Offline
Newbie

Joined: Thu Feb 18, 2010 3:45 pm
Posts: 29
Do you have a publicly available version of this that can pull the TCU ROM via SSM? I saw your other 5EAT ROM (I presume you pulled via this method) and would like to pull the one from my car. Tried it back on 2010 via manually without much success.


Top
 Profile  
 
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Thu Apr 27, 2017 12:49 am 
Offline
Senior Member

Joined: Mon Jan 19, 2009 2:31 pm
Posts: 1372
Location: Saratov, Russia
ECU\TCU ecuMem version is uploaded.
viewtopic.php?f=32&t=8513
Tested under WindowsXP, please test and report results under other Windows versions.


Top
 Profile  
 
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Tue May 02, 2017 11:48 am 
Offline
Newbie

Joined: Thu Feb 18, 2010 3:45 pm
Posts: 29
Sasha_A80 wrote:
ECU\TCU ecuMem version is uploaded.


Thanks!

On the Hatachi TCU's, does the SSM memory location map the same way as the ECU one does? Tried it last night with address 100000 and length 60000 (384K ROM size) and while it looked to have pulled something, it's a bit different that one you posted before.


Top
 Profile  
 
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Tue May 02, 2017 2:34 pm 
Offline
Senior Member

Joined: Mon Jan 19, 2009 2:31 pm
Posts: 1372
Location: Saratov, Russia
100000 start address is usually applicably to overcome Hitachi "direct dump protection".


Top
 Profile  
 
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Wed Jun 21, 2017 12:31 pm 
Offline
Newbie

Joined: Thu May 18, 2017 9:56 am
Posts: 13
So now i have the .bin file from the ECU. what do i use to read the file? Romraider says i don't have the definitions yet i have the latest 323 version.
V6 with TD04L and 3" exhaust and catless downpipe.


Attachments:
[1904400505-A1100B] 100000 2017-06-21 18h37m48 - Copy.bin [384 KiB]
Downloaded 25 times

_________________
MY04, JDM FXT 2.0 ,MT ECU ID 2G- 22611-AG572 , Stock
MY04, JDM Legacy A/T N/A 2.0 ECU ID 6V- 22611-AH820 2F04015206 STOCK
Top
 Profile  
 
 Post subject: Re: ecuMem: ROM\RAM read utility
PostPosted: Fri Nov 10, 2017 8:18 am 
Offline
Newbie

Joined: Sun Jul 16, 2017 6:35 am
Posts: 7
Sasha_A80 wrote:
Utility for ecu memory reading by SSM A0 "ReadBlock" command.

Denso 32 bit SH7055 calibration ROM start 060000 length 020000(not all area will be read)
Denso 32 bit SH7055 RAM start FF6000 length 008000 (not all area will be read)

Credits to Alexander c60 from forums.drom.ru/subaru


What happens for ECUs marked as: not all area will be read
Does that mean it's not a complete ROM image?
Is there another tool to write to this ECU?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 42 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subsilver by phpBBservice.nl