RomRaider Logo

RomRaider

Open Source ECU Tools
 FAQ •  Register •  Login 

RomRaider

Documentation

Community

Developers

It is currently Tue Dec 12, 2017 4:26 am

All times are UTC - 5 hours [ DST ]





Post new topic Reply to topic  [ 136 posts ]  Go to page 1, 2, 3, 4, 5 ... 10  Next
Author Message
 Post subject: CarBerry ROM - EcuFlash Definitions
PostPosted: Fri May 04, 2012 12:34 pm 
Offline
Experienced
User avatar

Joined: Tue Aug 30, 2011 3:17 pm
Posts: 900
Thanks to andya we finally have a completed EcuFlash def. These definitions allow adjustment of all tuning tables except certain feature option switches which will need to be edited in RomRaider.

Just place the CarBerryBASE.xml file into the subaru/bases sub-folder, and replace your current CarBerry.xml def with the CarBerry "version#".xml in the subaru/impreza sti sub-folder.


These defs are currently for use with v3.6.5, but they should work for future versions as well. If they become incompatible, I will update them as needed.


Update: Uploaded new definitions that andya created with metric definitions included in them. Any table with the (M) suffix will show metric values.



Thanks again andya :)


Attachments:
CarBerry 4.2.0 ECUFLASH defs_v4.zip [119.78 KiB]
Downloaded 2018 times
CarBerry Base Metric-Standard.zip [62.8 KiB]
Downloaded 3090 times
CarBerry ROM - EcuFlash DEFS 3.6.5 Full.zip [44.57 KiB]
Downloaded 3320 times


Last edited by Carbibbles on Mon Jun 11, 2012 11:12 am, edited 3 times in total.
Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Fri May 04, 2012 10:21 pm 
Offline
RomRaider Donator

Joined: Sun Nov 02, 2008 12:32 pm
Posts: 271
I would say 'no problem' but I absolutely have a new found respect for what you have done with this ROM. When my head quits spinning, I will start on the Metric unit conversion.


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Fri May 04, 2012 11:30 pm 
Offline
Newbie

Joined: Mon Oct 01, 2007 3:06 pm
Posts: 12
Awesome! I will be on this tomorrow. Been busy on the dyno lately. I should have some time to play with the bugeye again. This will come in very handy.


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Sat May 05, 2012 3:11 am 
Offline
Newbie

Joined: Tue Feb 09, 2010 8:23 am
Posts: 99
Location: Tbilisi, Georgia
Which version of EcuFlash this definition will works?
I have just tested with EcuFlash 1.29 and it shows all maps RPM ranges and MAP ranges incorrectly, SD Compensation map views completely incorrect
Image.


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Sat May 05, 2012 9:02 am 
Offline
RomRaider Donator

Joined: Sun Nov 02, 2008 12:32 pm
Posts: 271
maxouni wrote:
Which version of EcuFlash this definition will works?
I have just tested with EcuFlash 1.29 and it shows all maps RPM ranges and MAP ranges incorrectly, SD Compensation map views completely incorrect

Why have you not updated to the latest version of EcuFlash?
http://www.tactrix.com/index.php?option ... &Itemid=58


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Sat May 05, 2012 5:48 pm 
Offline
RomRaider Developer

Joined: Wed May 20, 2009 9:49 pm
Posts: 5659
Location: Canada eh!
Not that that EcuFlash version matters.
I suspect either a def problem or you are using it to open the wrong ROM version.


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Sat May 05, 2012 9:05 pm 
Offline
RomRaider Donator

Joined: Sun Nov 02, 2008 12:32 pm
Posts: 271
dschultz wrote:
Not that that EcuFlash version matters.
I suspect either a def problem or you are using it to open the wrong ROM version.

Found it. The 1.2 version has 0 tolerance. Conflict with */ in RPM. Tried it on 4 different computers with no issues till I loaded the earlier version of EcuFlash.


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Sun May 06, 2012 9:38 am 
Offline
RomRaider Donator

Joined: Sun Dec 25, 2011 8:04 pm
Posts: 21
CarBerryBASE.xml in folder EcuFlash\rommetadata\subaru\Bases

replaced CarBerry.xml def with the CarBerry STI.xml in subaru/impreza sti folder

and only thing that opens is
-two primary open loop fueling
-throttle tip-in enrichment
-egt too high fault code enable/disable
-timing a/b
-and speed density base load comp. with tables all messed up....

:roll:


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Sun May 06, 2012 5:51 pm 
Offline
Experienced
User avatar

Joined: Thu Jul 23, 2009 1:46 pm
Posts: 852
Carbibbles wrote:
Thanks to andya we finally have a completed EcuFlash def. These definitions allow adjustment of all tuning tables except certain feature option switches which will need to be edited in RomRaider.


Great work guys.

Is there some reason the bloblist feature in ECUFlash cannot accommodate 16bit switches?

_________________
Please do not send me support questions via PM, use the forum instead!


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Sun May 06, 2012 5:59 pm 
Offline
RomRaider Donator

Joined: Sun Nov 02, 2008 12:32 pm
Posts: 271
Merp wrote:
Carbibbles wrote:
Thanks to andya we finally have a completed EcuFlash def. These definitions allow adjustment of all tuning tables except certain feature option switches which will need to be edited in RomRaider.


Great work guys.

Is there some reason the bloblist feature in ECUFlash cannot accommodate 16bit switches?

I could look into it but there are so many changes constantly being made with addresses that it would be impractical until a final "Official" version is released.


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Sun May 06, 2012 8:44 pm 
Offline
Newbie

Joined: Mon Oct 01, 2007 3:06 pm
Posts: 12
So far so good here. I love how I can clean up my map now. Interpolation work wonders.


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Sun May 06, 2012 8:53 pm 
Offline
Experienced
User avatar

Joined: Thu Jul 23, 2009 1:46 pm
Posts: 852
andya wrote:
Merp wrote:
Carbibbles wrote:
Thanks to andya we finally have a completed EcuFlash def. These definitions allow adjustment of all tuning tables except certain feature option switches which will need to be edited in RomRaider.


Great work guys.

Is there some reason the bloblist feature in ECUFlash cannot accommodate 16bit switches?

I could look into it but there are so many changes constantly being made with addresses that it would be impractical until a final "Official" version is released.


Understandable, if you decide to define switches and need a hand or some examples just ask :)

Also, if the addresses are moving around a lot, I HIGHLY recommend you guys start using unique CALID's for each revision. Otherwise it's asking for someone to mix up a def, corrupt a rom, and brick their ecu.

_________________
Please do not send me support questions via PM, use the forum instead!


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Mon May 07, 2012 2:42 am 
Offline
RomRaider Donator

Joined: Sun Dec 25, 2011 8:04 pm
Posts: 21
karbarian wrote:
CarBerryBASE.xml in folder EcuFlash\rommetadata\subaru\Bases

replaced CarBerry.xml def with the CarBerry STI.xml in subaru/impreza sti folder

and only thing that opens is
-two primary open loop fueling
-throttle tip-in enrichment
-egt too high fault code enable/disable
-timing a/b
-and speed density base load comp. with tables all messed up....

:roll:


Thanks to Andya all works fine now, seems to be some sort of user error :lol:


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Mon May 07, 2012 11:22 am 
Offline
RomRaider Developer

Joined: Wed May 20, 2009 9:49 pm
Posts: 5659
Location: Canada eh!
Merp wrote:
Also, if the addresses are moving around a lot, I HIGHLY recommend you guys start using unique CALID's for each revision. Otherwise it's asking for someone to mix up a def, corrupt a rom, and brick their ecu.

I agree 100% with this approach. If you stick to three version digits then set the CAL ID to: CrBry365
Next revision would be: CrBry366

You can setup a dependency list if you wish for common unchanging items and refer back to an earlier version as needed. then just keep the base up-to-date.
Code:
<rom>
  <romid>
    <xmlid>CrBry366</xmlid>
    <internalidaddress>200</internalidaddress>
    <internalidstring>CrBry366</internalidstring>
    <ecuid>3D04EA4605</ecuid>
    <year>02-03</year>
    <market>JDM</market>
    <make>Subaru</make>
    <model>Impreza</model>
    <submodel>STi</submodel>
    <transmission>MT/AT</transmission>
    <memmodel>68HC16Y5</memmodel>
    <flashmethod>wrx02</flashmethod>
  </romid>
  <include>CrBry365</include>
</rom>
<rom>
  <romid>
    <xmlid>CrBry365</xmlid>
    <internalidaddress>200</internalidaddress>
    <internalidstring>CrBry365</internalidstring>
    <ecuid>3D04EA4605</ecuid>
    <year>02-03</year>
    <market>JDM</market>
    <make>Subaru</make>
    <model>Impreza</model>
    <submodel>STi</submodel>
    <transmission>MT/AT</transmission>
    <memmodel>68HC16Y5</memmodel>
    <flashmethod>wrx02</flashmethod>
  </romid>
  <include>CarBerryBASE</include>
</rom>


Top
 Profile  
 
 Post subject: Re: CarBerry ROM - EcuFlash Definitions
PostPosted: Mon May 07, 2012 1:45 pm 
Offline
Experienced
User avatar

Joined: Tue Aug 30, 2011 3:17 pm
Posts: 900
Updated the first post with andya's def fixes.

maxouni - try removing any ecuflash defs that have anything to do the carberry rom. Then restart the computer and put these defs in place and open a rom. Ive had some weird issues with ecuflash defs before and this seemed to fix it.


Ill put in a CALID system for ecuflash, with romraider I have a byte that is checked for version information to make sure the user is alerted if the wrong def is used with the wrong rom. But I don't think EcuFlash can do that.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 136 posts ]  Go to page 1, 2, 3, 4, 5 ... 10  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: andea79, trez0r and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subsilver by phpBBservice.nl