RomRaider Logo

RomRaider

Open Source ECU Tools
 FAQ •  Register •  Login 

RomRaider

Documentation

Community

Developers

It is currently Sun Aug 14, 2022 2:45 pm

All times are UTC - 5 hours [ DST ]





Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: 64-bit build: Error loading x.bin
PostPosted: Sun May 15, 2022 4:24 am 
Offline
Experienced

Joined: Thu Apr 14, 2011 8:16 am
Posts: 365
64-bit build only. Same bin and xml as what works with the 32-bit build.

This comes up when trying to load a bin file then the program hangs.

Error loading binfile.bin
xmlfile.xml: Format specifier '%d'

Attachment:
RomRaider Error.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: 64-bit build: Error loading x.bin
PostPosted: Sun May 15, 2022 8:30 am 
Offline
RomRaider Developer

Joined: Wed May 20, 2009 9:49 pm
Posts: 7031
Location: Canada eh!
What definition file?


Top
 Profile  
 
 Post subject: Re: 64-bit build: Error loading x.bin
PostPosted: Mon May 16, 2022 1:46 am 
Offline
Experienced

Joined: Thu Apr 14, 2011 8:16 am
Posts: 365
dschultz wrote:
What definition file?


It's my own XML with only 3 ROMs specified using the a33b nissandefs combiner into a single XML that I've been using without issues for years. I'll do another combine all using just a33b's nissandefs but I suspect the result will be the same.


Top
 Profile  
 
 Post subject: Re: 64-bit build: Error loading x.bin
PostPosted: Mon May 16, 2022 9:08 am 
Offline
RomRaider Developer

Joined: Wed May 20, 2009 9:49 pm
Posts: 7031
Location: Canada eh!
I can load VC264 without getting an error, expect for opening the Fuel Injection Multiplier table.
The NISSAN_BASE definition is wrong. It needs to be corrected as follows (sizey must equal 1):

Code:
   <table type="2D" name="Fuel Injection Multiplier" category="Fuel" storagetype="uint16" endian="big" sizey="1" userlevel="1">
      <scaling units="" expression="x" to_byte="x" format="#" fineincrement="1" coarseincrement="100" />
      <table type="Static Y Axis" name="K Value" sizey="1">
         <data>K Value</data>
      </table>
      <description>Global Fuel injection Multiplier. This can be used to compensate for larger or smaller injectors, or a larger or smaller maf housing. This can also be used for alternate fuels such as e85.</description>
   </table>


Top
 Profile  
 
 Post subject: Re: 64-bit build: Error loading x.bin
PostPosted: Mon May 16, 2022 9:31 pm 
Offline
Experienced

Joined: Thu Apr 14, 2011 8:16 am
Posts: 365
dschultz wrote:
I can load VC264 without getting an error, expect for opening the Fuel Injection Multiplier table.
The NISSAN_BASE definition is wrong. It needs to be corrected as follows (sizey must equal 1):

Code:
   <table type="2D" name="Fuel Injection Multiplier" category="Fuel" storagetype="uint16" endian="big" sizey="1" userlevel="1">
      <scaling units="" expression="x" to_byte="x" format="#" fineincrement="1" coarseincrement="100" />
      <table type="Static Y Axis" name="K Value" sizey="1">
         <data>K Value</data>
      </table>
      <description>Global Fuel injection Multiplier. This can be used to compensate for larger or smaller injectors, or a larger or smaller maf housing. This can also be used for alternate fuels such as e85.</description>
   </table>


That worked. Thanks very much. I'll bring the NISSAN_BASE error to a33b and Pytrex's attention.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subsilver by phpBBservice.nl