 |
RomRaiderOpen Source ECU Tools |
RomRaider
Documentation
Community
Developers
|
|
Page 1 of 1
|
[ 1 post ] |
|
Author |
Message |
jon7009
|
Post subject: Carberry EJ205 enrichments Posted: Mon Jun 10, 2019 11:02 pm |
|
 |
Senior Member |
Joined: Thu Dec 18, 2014 6:31 pm Posts: 1497 Location: oregon
|
This spreadsheet was developed for a USDM EJ205 with TGV deletes.
On the vehicle in question, mine, the TGV delete consists of removing rods/valves, blending the lip in the bowl out, and edging the divider on both sides.
there are two primary enrichment tables listed, this is because my setup uses some extra Alpha N logic, where throttle position has more capability in referring to timing/fueling. this is to emulate the 3D LOAD/ECT tables as presented in newer ROMs. The first would be roughly the 0.3 g/rev and under range, and the second would roughly be 1.6+ g/rev load range.
For the enrichments that aren't tip-in or primary enrichment, there are three tables listed, a derived third order polynomial shown, and then the derived polynomial placed into the table is used. It is intended that the bottom most (derived) tables are used.
butter.
_________________ if you're generous, feel free to donate. venmo @ jon7009, 1047 when asked jedilley@gmail.com for paypal
|
|
Top |
|
 |
|
Page 1 of 1
|
[ 1 post ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|